App changelog

What's new:

• New cart management: status, programs, settings and alarms.
• Clearer save messages and preservation of pending changes.
• Fixed humidification periods per compartment and warnings for inactive ventilation periods.
• Minimum-time and standby counters in irrigation programs.
• Internal pH/EC settings shown only on compatible equipment.
• Improvements to administrative management and installer comments.

What's new:

• Open the equipment directly from its alarm notifications.
• Fixes when saving irrigation, climate and vent settings.
• The pH type (acid/base) is now shown in the recipe settings.
• Fixed the display of active valves on configurable equipment and their automatic refresh on the map.
• Improved equipment administrative management and permissions on mobile.
• Improvements to private installer comments.

What's new in this version:

• Improved mobile permissions and owner/installer management.
• Fixed forced ventilation and humidity influence settings.
• Improved irrigation and configurable-equipment programs: modes, styles and names.
• Improved dashboards, profile and IRIS display.
• Fixed acid/base selection in fertilization formulas.
• The Information screen now shows the installed version.
• Bug fixes and stability improvements.

The following changes and improvements have been introduced:

• New parameters and limits in fertilization formulas.
• Improved display of equipment operating hours and connections.
• Improved management of irrigation programs and groups.
• Improved ventilation schedule editing and weekday selection in programs.
• Bug fixes and stability improvements on Android and iOS.

The following changes and improvements have been made:

• Major improvements to app performance, responsiveness and design.
• Climate status table is now integrated into the dashboard.
• Improved PDF and Excel report exports.
• Improvements to irrigation programs, groups and reports.
• New filters and improved farm and equipment views.
• Italian language support and improved password recovery.
• Bug fixes and stability improvements.

The following changes and improvements have been made:

• Dashboard customization: reorder and hide farms, devices, and metrics, and configure climate colors and status indicators.
• Support for shared NTC360 sensors in dashboards, charts, reports, and the sensor list
• Improved irrigation scheduling with NTC360 sensor-based conditions
• Enhancements to device management and connection status visibility
• Bug fixes and stability improvements for dashboards, reports, and climate

The following changes and improvements have been made:

• Option to delete recurring reports.
• Bug fixes.

The following changes and improvements have been made:

• Added service cutoff date along with explanatory document.
• Improved performance in property listings when they are very large.

The following changes and improvements have been made:

• New support for MAPA and custom fertilizers in irrigation records.
• Ability to invite non-existing users via email.
• Added option to copy schedules.
• Improvements to password change and account deletion.
• Improvements to irrigation reports and Excel export.
• Improved chart display when many sensors are present.
• Bug fixes and stability improvements.

The following changes and improvements have been made:

• Fertilizer name history in irrigation reports.
• Invitations via email to non-existing users.
• Improvements to password change and account deletion.
• Display scroll in the legend of customized charts with many sensors.
• Added option to copy schedules.styles.
• Removal of refresh jumps on farms.
• Minor bug fixes.

The following changes and improvements have been made:

• Added water flow graph to the field dashboard.
• Display thermal inversion on all terminals that include ventilation.
• Display index on valves, programmes and named groupings.
• Correct maximum programmes/groupings/etc. on the irrigation dashboard.
• Correct virtual weather data for configurable equipment. Unify tablet styles.

• Fixed the programme number shown in the calendar popup for past events.

The following changes and improvements have been made:

• Added water flow graph to the field dashboard.
• Display thermal inversion on all terminals that include ventilation.
• Display index on valves, programmes and named groupings.
• Correct maximum programmes/groupings/etc. on the irrigation dashboard.
• Correct virtual weather data for configurable equipment. Unify tablet styles.

The following changes and improvements have been made:

• Now, valves without grouping appear in black and white on the map.
• Corrections to forced ventilation, on the status screen, in the input/output report and in unknown equipment.

The following changes and improvements have been made:

• Map improvements: you can now place sensors, choose which elements to display, view them grouped or individually, and remove the ones you don't need.
• Redesigned About page.
• Wind segment alarms for climate equipment.
• Minor improvements and bug fixes.

The following changes and improvements have been made:

• Map improvements: you can now place sensors, choose which elements to display, view them grouped or individually, and remove the ones you don't need.
• Redesigned About page.
• Wind segment alarms for climate equipment.
• Minor improvements and bug fixes.

The following changes and improvements have been made:

• Corrections to the time selector for configuring climate control equipment in the mobile version.
• Allow decimals in distance fields when editing a property.
• Limit of 24 recipes for Mastia Hidro 3k equipment.
• Correction of loss of values when navigating recipe groups.
• Improvement of the climate status table in the mobile version.
• New link to the version history on the “About” screen.

The following changes and improvements have been made:

• Program simultaneity in irrigation head-state terminals and configurable ones
• Input/output list in climate equipment for installers
• Possibility to reorder groupings by program and added limit of 10 groupings
• New fields added to the irrigation report
• Fixes in the cost report
• Minor improvements and corrections

The following changes and improvements have been made:

• Users can now download an Excel file with information about the equipment on which they act as installers.
• Added the functionality to cancel alarms on configurable equipment.
• Improved the installer configuration interface for climate equipment.

• Added irrigation head locking and filter cleaning functions.

The following changes and improvements have been made:

• Installers can now add comments or tags to the equipment they manage, improving organization and making it easier to find them.
• Accessibility mode: a high-contrast mode has been added to improve readability.
• Unified top and side spacing across the entire application.
• Minor improvements and bug fixes.

The following changes and improvements have been made:

• Redesign of climate system sections using pill-style layout.
• Redesign of the climate system status screen.

The following changes and improvements have been made:

• Redesign of climate system sections using pill-style layout.
• Redesign of the climate system status screen.

The following changes and improvements have been made:

• IRIS now allows configuration of two blood pressure monitors.
• Improved accessibility by updating the typography, optimizing readability on different screen sizes.
• Improvements in the handling of the administrative management of the equipment.
• Bug fixes and aesthetic improvements.

The following changes and improvements have been made:

• IRIS now allows configuration of two blood pressure monitors.
• Improved accessibility by updating the typography, optimizing readability on different screen sizes.
• Improvements in the handling of the administrative management of the equipment.
• Bug fixes and aesthetic improvements.

The following changes and improvements have been made:

• Remote control of the equipment console for installers.
• In irrigation equipment, only the program options compatible with the model are shown.
• Configuration of programs by tray on demand in configurable equipment.
• Improvements in the use of virtual probes.
• Several improvements in IRIS.
• Corrections in cost report generation, irrigation drainage visualization and climate configurations edition.

The following changes and improvements have been made:

• Remote control of the equipment console for installers.
• In irrigation equipment, only the program options compatible with the model are shown.
• Configuration of programs by tray on demand in configurable equipment.
• Improvements in the use of virtual probes.
• Several improvements in IRIS.
• Corrections in cost report generation, irrigation drainage visualization and climate configurations edition.

The following changes and improvements have been included:

• New sensor and cost reports.
• New device status indicators have been added to always know whether it is connected or watering.
• Improvements have been made to IRIS.
• Minor style corrections.

The following changes and improvements have been included:

• New sensor and cost reports.
• New device status indicators have been added to always know whether it is connected or watering.
• Improvements have been made to IRIS.
• Minor style corrections.

The following changes and improvements have been included:

• Two-factor authentication (2FA) and the ability to view access to your account from the security section in the user settings.
• Minor fixes to maps and styles.

The following changes and improvements have been included:

• Two-factor authentication (2FA) and the ability to view access to your account from the security section in the user settings.
• Minor fixes to maps and styles.

The following changes and improvements have been included:

• Two-factor authentication (2FA) and the ability to view access to your account from the security section in the user settings.
• Minor fixes to maps and styles.

• Added a new status for the configurable irrigation head.
• Introduced new equipment status icons.
• Fixed errors in datalogger notifications.
• Adjusted activation and deactivation buttons for manual irrigation programs and configurable settings.
• Made minor style and user experience improvements.

• New system for releasing equipment from organisations.
• Fixes to the irrigation advisor.
• Unified data value badges and improved measurement styling.

Version 1.6.0 Improvements and Fixes

• New reports interface with better mobile compatibility.
• Periodic reports now sent via email.
• Full status for irrigation equipment head unit.
• Push notifications visible on Datalogger devices.
• Improved time and volume management for group irrigation.
• Enhanced compatibility with Luxar v2 devices.
• Various interface improvements.

Fixed issues that prevented the proper creation of a property.

The following updates and improvements have been implemented:

• A problem that prevented scrolling has been resolved.
• New functionalities have been added to the maps.

Corrections have been made to the Datalogger equipment.

• Fixes in the climate, irrigation and configurable equipment sections.
• Minor fixes to the charting system.
• Equipment owners can claim ownership of equipment management.

The following changes and improvements have been introduced in this new version:

• More default graphs have been added for Dataloggers.
• Head status has been displayed on farms and on the user home page.
• Fixed multiple bugs related to auto-linked irrigation schedules, fertilizer recipe time selection, and decimals in certain fields.

Small adjustments have been made to the irrigation program groupings.

The following changes have been introduced:

• Significant improvements in the listing of irrigation programs with more information and sorting possibility.
• Added PH and EC graphs as default for irrigation equipment.
• Minor improvements and optimizations of graphs.
• Updated color icons.
• Improved error handling.
• Multiple small fixes.
• Notifications for all devices have been added.

The following improvements and changes have been implemented:

• Added a meteogram and improved weather forecasts.
• Users can enable and disable their notification subscriptions.
• Users can fully manage equipment administration through MyUCROP.
• More accurate virtual ET0 calculations at both farm and equipment level.
• Multiple fixes in the public and private areas of the application.

This version includes the following changes:

• Fixes to generic programs for climate control equipment.
• Improved usability in landscape orientation.
• Improved support for the irrigation advisor on datalogger equipment.

The following changes and improvements have been introduced:

• Support for the Synion product range.
• New field validation for climate control equipment.
• New main dashboard with more information.
• Various fixes.

Improved aspects of the user interface for climate control and irrigation equipment.

Improved the responsive layout of several application screens.

Added the irrigation advisor, various interface and chart improvements, and user organizations.

Added administrative management of equipment through MyUCROP, new chart interactions and various bug fixes.

Added support for configurable equipment and a menu to improve navigation between screens. Charts now allow the use of actuators. Also fixed an error that prevented the ventilation temperature from displaying correctly in climate control programming.

Added support for configurable equipment and a menu to improve navigation between screens. Charts now allow the use of actuators.

• Various fixes and improvements
• Irrigation controllers now provide irrigation head status information
• Improved virtual sensor systems
• Added support for multiple crops on farms

Fixed issues affecting users in dark mode, as well as a map error that prevented users from editing the location of their equipment.

Improved Android maps to resolve issues affecting some devices.

First version

• Farms and irrigation, datalogger and climate equipment
• Permissions system
• Device control
• Notifications